Generator Wireless Remote Control Start and Off Set By Hiphen Solution Services Ltd.

Generator Wireless Remote Control Start and Off Set By Hiphen Solution Services Ltd.


Product Description

Generator Wireless Remote Control Start and Off Set

Features:

Low cost controller designed to start/stop a generator manually and remotely

Suitable for 1-3 phase gasoline and diesel gensets

Designed for front panel mounting

Survives cranking dropouts

Generator protection, built-in alarms and warnings

This set is designed to wirelessly control any electric start generator having a remote start input or being specially adapted for this purpose.

It includes a 2-button transmitter and a receiver with relayed normally open (NO) and normally closed (NC) contact groups. The set could remotely start and stop a generator on 10-100 meter distance depending on possible obstacles between transmitter and receiver directly connected to generator.

4PRO WT433-02 GENERATOR WIRELESS REMOTE CONTROL TRANSMITTER

TECHNICAL SPECIFICATIONS:

• Current consumption in active state: ≤12mA

• Working frequency: 433.92 MHZ

• Modulation: AM

• Transmit distance: 10-100m

• Dimensions: 61×30×12mm

4PRO WR433-01 GENERATOR WIRELESS REMOTE CONTROL RECEIVER

TECHNICAL SPECIFICATIONS:

• Voltage: 12V DC or 24V DC depending on configuration settings

• Working temperature: -30?-+70?

• Frequency: 433MHz

• Memory capacity: 30 learning/fixed code transmitters

• Standby current consumption: ≤9mA

• Relay current output rating: up to 5A

• Dimensions: 62×43.5×30mm

RECEIVER CONFIGURATION SETTINGS

To change the configuration jumper settings, please remove a receiver plastic case by loosening two screws from the device bottom side.

3S-Jumper (if closed): to activate the relay for 3 seconds only;

L-Jumper (if closed): to activate/deactivate the relay by the ON button only with both state fixed;

M-Jumper (if closed): to activate the relay by the ON button and deactivate by the OFF button;

If all above-mentioned jumpers are opened: to activate/deactivate the relay by the ON button only without fixed state;

12V/24V-Jumper: 12V DC (if closed) or 24V DC (opened).

Note: M-Jumper must be closed for the most of the generator controllers.

WE CAN SUPPLY AND INSTALL IN ANYWHERE IN NIGERIA

OFFICES IN LAGOS, ABUJA, PORT HARCOURT AND BENIN CITY

Please CALL/WHATSAPP: 0703-514-6988, 0807-779-7562, 0802-589-7223, 0818-116-0990

Email: info (AT) hiphensolutions.com

Web: www.hiphensolutions.com/products

We are Multi-Award Winning company in Technology Solutions, Access Control, Safety, Security and Automation Systems